|
Used some of these t-nuts....  ...that I salvaged from the old desk I recycled for the workbench top. I drilled the mounting hole and used the bolt to draw the t-nut....  ....tight into the underside of the bench-top. Now I have a way to temporarily secure my vise and drill press. Mounting bolts go through the top of the desk and hold nice and tight in the t-nuts:  The vice sits on the front corner and can be rotated to face any direction  These will come in handy at some point I'm sure.
0 Comments
Leave a Reply. |
New here? Try starting at:AuthorHusband, father and 911 dispatcher. Long time pilot with a licence that burns a hole in my pocket where my student loan money used to be. First time aircraft builder. Looking to fly my own airplane. Categories
All
Archives
October 2021
build log
|
RSS Feed
